Droika dia4 :: més drones

Quart dia del taller
TELENOIKA OPENSOURCE DRONES WORKSHOP
https://telenoika.net/projectes/droika
Apart de la teoria, classes de vol i muntatge de les estructures dels Flones i del Droika, avui hem instal·lat el software de control dels Flones als nostres Androids.

Arducopter: Arducopter + BT + Esqueleto eléctrico + Clases vuelo + Calibrar Hélices


Trimear abejas.
Explicación tipos de pegamento y aplicación en flone.
Test Flone rotura + reparación.
Preparación de smartphone para instalar apk
Cerrar compra abejas / cargadores / helices.
Configuración arducopter?

Running on a Device
Before testing your sketch on your device, you must:
Turn on «USB Debugging» on your device – this process varies by device and which version of the OS you have installed. Try one of the following:
Menu → Applications → Development, then enable USB debugging
On the Nexus tablets, Settings → About tablet, then click on the Build number seven times to activate USB debugging (so weird).

If you are running Windows or Linux, you need to read Google’s Using Hardware Devices documentation to install a special USB driver and take care of additional settings.
http://developer.android.com/tools/device.html

14FPS / Cycle: 67 / MaxCycle116 / 170º Mag: 30ms / Acc 10 ms / GPS XX ms

BT -> Arduino
=============
5V (o VCC) -> 5V o VCC
GND -> GND
RX -> RX
TX -> TX
KEY – 3.3V

* Cambio nombre BT a floneXX:
http://www.ordinoscope.net/index.php/Mod%C3%A9lisme/Mod%C3%A8les/Multicopt%C3%A8res/Electronique/Crius_AIO/Bluetooth_HK_HB01
ATOK
AT+VERSIONOKlinvor1.6
AT+NAMEfloneXXOKsetname
AT+PINXXXXOKsetPIN
AT+BAUD8OK115200

* Sistema sujeción smartphone:
* Sistema sujeción bateria

droika@telenoika.net
[Streaming signal – LowQ, 352×288 – (CC BY 3.0)]